8
OPERATION
Copyright © 2020, Baby Trend® Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
7
ASSEMBLY
Copyright © 2020, Baby Trend® Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
TO ATTACH AND OPERATE TRAY
WARNING:
Always
check that the high chair is
locked in the open position
before using.
WARNING:
The tray
is not designed to hold the
child in the chair. The child
should be secured in the
high chair at all times by the
5-point restraining system,
either in the reclining, semi-
reclining or upright position.
TO ATTACH TRAY
10)
• To attach the Tray, line up the grooves
on the bottom of the tray with the
armrests of the high chair. Squeeze the
Tray’s release handle and slide the tray
onto the armrests (Fig. 10a). The Tray
has a 3-position adjustment. To adjust
the position, squeeze the Tray’s release
handle located underneath the tray and
reposition the tray to the desired position
(Fig. 10b). Release the Tray’s handle.
Check that the Tray is securely locked in
its new position.
Fig. 10b
3-position
Tray Release located underneath tray
Fig. 10a
Fig. 9b
Fig. 9c
Fig. 9d
9)
• Loop the flap on the back of the pad over the top of the Seat Back. Connect
the Seat Pad to the Seat Back with the two Elastic Loops. These fit over the
Attachment Tabs located near the top harness slots (Fig. 9a).
• Attach the bottom of Seat Pad to the Seat Base with the two Elastic
loops located at the rear of the bottom of the Seat Pad. These fit over the
Attachment Tabs located on the Seat Base near where the Seat Back and
Seat Base Join (Fig. 9b).
• Attach each anchor hook of the Seat Pad to the side of the seat armrest
(Fig. 9c). Ensure that the slot of the anchor hook slides through the under
side division (Fig. 9d).
Fig. 9a