3
4
ASSEMBLY
ASSEMBLY
Copyright © 2020, Baby Trend® Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Copyright © 2020, Baby Trend® Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
IMPORTANT!
To ensure safe operation of your product, please
follow these instructions carefully. Please keep these instructions for
future reference.
IMPORTANT!
Before assembly and each use, inspect this
product for damaged hardware, loose joints, missing parts or sharp
edges. NEVER use if any parts are missing or broken.
IMPORTANT!
Adult assembly is required.
IMPORTANT!
Always check that the high chair is locked in the
open position before using.
ATTENTION:
Carefully remove parts from box. Check that
you have all the parts for this model before
assembling the high chair. NOTE: Certain
High Chair models are packaged with the
High Chair Seat Fabric and Seat Insert
already attached to the Seat Back.
TO ASSEMBLE SEAT
1)
• First locate the seat base. From the rear
of the seat base, remove the metal hinge
rod from the base (Fig. 1a).
• Press the latch down and slide the rod
out (Fig. 1b).
2)
• Intersect the seat base with the seat back at the joint (Fig 2a). Press the latch
down to insert the hinge rod through the seat back and seat base (Fig. 2b).
NOTE:
Firmly
slide the rod until it stops (Fig. 2c). Ensure the latch is moved
up to secure rod and seat in place (Fig. 2d).
Fig. 2a
Fig.2c
Fig. 2b
Fig. 2d
Seat Back
Seat Base
Fig. 1b
Seat Base
Fig. 1a
Seat Back
Hinge Rod
Hinge rod retainer
