Baby Lock ECS8, Инструкция по эксплуатации

Страница: 125 / 271

123
Arranging Embroidery Designs (Layout & Editing)
A
rr
a
ng
in
g Embr
oide
ry
D
e
s
igns
(
L
a
y
out
& E
d
iting)
Changing the Image Settings
Changing the display of the
background image
The image that remains in the work area can be
displayed or hidden, or a faded copy of the image
can be displayed.
1.
Click Image , then Display Image , and then
select the desired setting.
• To display the original image, click On (100%) .
• To display a faded copy of the image, click the
desired density ( 75% , 50% or 25% ).
• To hide the original image, click Off .
Changing the size, angle
and position of the image
The size, angle and position of the image can be
adjusted.
1.
Click Image , then Modify .
→
A red line and handles appear around the
image.
Moving an image:
1.
Move the pointer over the image.
2.
Drag the image to the desired location.
Scaling an image:
1.
Move the pointer over one of the handles.
2.
Drag the handle to adjust the image to the
desired size.
Rotating an image:
An image can be rotated in 90-degree increments.
1.
Click Image , then Rotate . Select 90 Degrees
Clockwise or 90 Degrees
Counterclockwise .
→
The image is rotated in the specified
direction.
Deleting an image:
1.
Press the key, or click Edit , then
Delete .
→
The image will be deleted from the Design
Page.
b
Memo:
Press the shortcut key ( ) to switch
between displaying the image ( On (100%) ) to
displaying it faded at each density ( 75% , 50%
and 25% ) to hiding the image ( Off ).
b
Memo:
The status bar shows the dimensions (width
and height) of the image.
F6
b
Memo:
If the key is held down while a handle is
dragged, the image is enlarged or reduced
from the center of the image.
Shift
Delete