STITCH SETTINGS SCREEN
15
■
Region settings
a
Shows the stitch type and color for the selected
region.
b
Shows the stitch settings for the selected region.
Fill stitch settings
Stippling stitch settings
Decorative fill
a
Use
to select the line or region to be
changed.
Each press of
moves the highlighting of the
selected pattern in order.
b
Select the setting to be changed, and then
change the setting in the screen that
appears. (In this example, the sewing
direction will be changed.)
The setting screen appears.
c
Press
, and then use
to change the
direction.
d
Press
to apply the setting.
*
appears on the tab for setting currently being
changed.
*
Change other settings in the same way.
Direction
Specifies the sewing direction. Select
“Manual” to change to the desired direction
of fill stitch.
Density
Specifies the stitch density of fill stitch.
Pull
compensation
Specifies to correct the shrinkage of the
pattern by slightly shortening or lengthening
the stitching. Change the setting after you
embroider the pattern and can check the
shrinkage.
Under
sewing
Select if you need or do not need the under
sewing for the stabilized fabric.
Run pitch
Specifies the length of a stitch of the
stippling stitch.
Spacing
Specifies the spacing between the stitches
when embroidering the stippling stitch.
Distance
Specifies the offset from the pattern outline.
Size
Increases/reduces the size of the pattern.
Direction
Specifies the rotation angle of the pattern.
Outline
The outline will be converted to embroidery
data whether “ON” or “OFF” is selected. If
“ON” is selected, the number of thread
jumps can be reduced.
a
b
Содержание Destiny BLDY-U
Страница 1: ......
Страница 50: ...English Version 0...
