Baby Lock Decorator's Choice BLDC2, Инструкция и справочник

Страница: 127 / 152

Sewing the Various Built-In Decorative Patterns 125
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
3
b
Press the numeric key (0 through 9) for the
pocket where the pattern is saved.
X
The saved contents of the pocket for the
selected number are retrieved.
• If nothing was saved in the selected pocket, a
beep is sounded, and the screen displayed
before the numeric key was pressed appears
again.
• To select a different pocket, use the numeric
keys to type in the number of a different
pocket.
Memo
z
After a decorative stitch or character stitch
pattern is retrieved, press
(Decorative
stitch key) or (Character stitch key) to
combine additional patterns with it or edit it.
Realigning the pattern
The pattern may not be sewn correctly, depending on
the type of fabric being sewn or the sewing speed. If
this occurs, adjust the pattern while sewing on a
piece of scrap fabric that is the same as that used for
your project.
a
Attach monogramming foot “N”.
• For details, refer to “Replacing the presser
foot” (page 39).
b
Select (No. 31 of , selected with
).
Press (Decorative stitch key), and then use
the numeric keys to type in “31”.
X
The pattern alignment stitch is selected.
c
Start sewing.
X
The pattern for making the adjustment is
sewn.
X
The sewing machine stops after it has
finished sewing the pattern.
d
Check the sewn pattern.
If the part of the pattern indicated in the
illustration is sewn uniformly, the pattern is
correctly aligned.
If the pattern is not sewn correctly, follow the
steps below to adjust the sewing.
e
Press (Settings key) in the operation
panel.
X
The settings screen appears.
f
Press or (Stitch length keys) until is
displayed.
To adjust the vertical position, select .
X
The screen for adjusting the pattern appears.