NEEDLE AND THREAD INFORMATION
Use the correct needle system
(134)
. Choose from sizes 12 through 21,
according to the type of thread used. A guide to help you choose the
correct combination of needle and threads is always available on the Regalia
Stationary machine. From the Home screen, tap the
System Information
button and choose the
Needle and Thread Guide
button.
QUICK REFERENCE CARD
TO THREAD THE REGALIA
www.BabyLock.com
Part #QM30026 • ©2022
1.
Place thread cone onto spool post (1), thread through thread-mast eyelet (2) from back to
front and pass through thread guide (3).
2.
Continue to three-hole thread guide (4). Wrap all three holes from back to front, being
careful not to cross threads. If delicate threads are breaking, skip one or two holes to
lessen tension.
3.
Pass through thread guide (5) and continue
down to tension assembly (6). Ensure
that the thread is flossed between the
two tension discs.
4.
Catch the take-up spring (7) with thread and
pull it down under the stirrup thread guide (8).
5.
Bring the thread up and through the hole of
the take-up lever (9) from back to front, and
then through the lower thread guide (10).
Finally, thread through the needle bar thread
guide hole (11).
6.
Follow the groove down the front of the needle
and insert thread through the eye of the needle (12)
from front to back. While pulling thread through
the eye, be careful that the thread does not twist
around the needle.
