Manual Threading
Threading the Lower Looper
A.
Pass thread through top thread guide hanger from
back to front.
B.
Bring thread down and pass through the thread guide
and under pre-tension disc.
C.
Bring thread straight down through the slot so that it
passes between the tension discs. Give the thread a
tug to be sure it is lodged between the tension discs.
' +RRNWKUHDGIURPWKHULJKWVLGHDQGSXOOWKUHDGWRZDUG
the left.
( +RRNWKUHDGIURPWKHERWWRPVLGH
) +RRNWKUHDGIURPWKHERWWRPVLGHDQGSXOOWKUHDG
toward the left.
G.
Turn handwheel toward you until the lower looper is
in extreme left side position. Pass thread through hole
using the tweezers.
+ 7XUQKDQGZKHHOXQWLOWKHORZHUORRSHULVLQH[WUHPH
right position. Use the tweezers to pass thread
through lower looper eye, front to back. Pull at least
3 inches (7cm) of thread through lower looper over
upper looper and toward the back of the machine.
Remove the free arm cover and thread the lower looper thread as illustrated below.
)ROORZWKH%/8(FRORUPDUNHGWKUHDGJXLGHV
A
D
E
F
B
C
G
H
Remove free arm cover by swinging the extension table out
with the lever in locked position. The free arm cover will stay
attached to the extension table.
3
G
