One Step
™
Formula Mixer Parts
Installing Batteries
Removing & Installing the Mixing Wand
+
-
+
-
+
-
Battery Cover
Lid
Power Button
Mixing Wand
Pitcher
AA Batteries
(not included)
1
2
• Before each use, wash Pitcher, Mixing Wand and bottom of Lid in warm,
soapy water.
Do not immerse the Lid in water.
Mixing Wand and Pitcher are top-rack dishwasher-safe.
• CAUTION: The lid contains electronics, please take note of the following:
- Do not immerse the Lid in water or other liquid.
- Do not place the Lid in a dishwasher.
- Note: If the lid is accidentally immersed and water gets inside, remove battery
cover & batteries, wipe with a dry cloth & allow to dry completely
before next use.
Close Battery Cover by aligning the
Open/Close indicator tabs (see below)
then rotating the Cover clockwise.
(Note location of power button)
Cleaning
Turn Battery Cover
counter-clockwise
to open.
Lift Battery Cover.
3
Insert batteries
+
-
+
-
+
-
4
Closed
Open
To remove the wand, grasp
the bottom of the wand and
pull slowly and firmly.
The Wand can be removed for cleaning.
To install the wand,
slide the hole in the end
over the axle on the bottom
of Lid and push firmly until it stops.
1
2
Please note: Rechargeable batteries will need more
frequent charging if the mixer is stored in the fridge.
