Elite Pad Connecting
Cord - Part A
Getting Started
Congratulations on your purchase of the ChildMinder
®
Elite Pad and Key Ring System. Your Elite Pad and Key
Ring come with pre-installed batteries.
Before using the Elite Pad and Key Ring system, you must
remove the red battery guards from your Key Ring and
Base Units.
Key Ring Unit Battery Guard/Battery Removal
1. With the back side of the Key Ring unit facing upwards,
pull the battery door to open.
2. Remove the red battery guard.
3. Close the battery door on the Key Ring Unit.
Base Unit Battery Installation
1. Flip the Base Unit over so that the back is exposed.
2. Locate the battery compartment and remove the cover.
3. Insert two AAA alkaline batteries.
4. Place back the battery compartment cover.
Installation of the ChildMinder Elite Pad
Please refer to your Child Restraint System (CRS)
Owner’s Manual for instructions on how to lift the top
covering of your child’s safety seat.
The Elite Pad must be placed underneath the top
covering of the CRS in the seat area.
Placement of Elite Pad.
1. Gently thread the pad’s connecting cord (part A)
through an obstructed opening in the seat. Be careful
not to crease or stretch the cord (part A).
ChildMinder
®
Elite Pad
& Key Ring System
User Guide
CAUTION! The ChildMinder
®
Elite Pad and Key Ring are
meant to serve only as a safety support supplement
and does not represent any attempt to circumvent,
mitigate, nor substitute a caregivers’ legal duties under
applicable laws.
2. Remove the backing from the Base Unit (Part Bb)
and attach it to a secure flat surface on the CRS that
is not within reach of your child.
3. Connect the pad’s cord (part A) to the Base Unit
(part B).
4. Place the Base Unit (part B) over the Base Unit
Velcro (Part Bb).
Activating Your ChildMinder System
Single Unit Key Ring
1. Secure your child to their CRS/safety seat.
2. Once your child is in the CRS, the Base Unit will begin
to beep and the green LED will flash simultaneously.
3. Press and hold the center button on the Key Ring
for a second or until it beeps and or/ the green LED
starts to flash.
4. The Base Unit will stop beeping and the red LED will
flash both on the Base Unit and the Key Ring. Your
ChildMinder System is now activated.
Key Ring Unit
Elite Pad
Learn Button
LED Indicator
Center Button
Base Unit -
Part B
Base Unit Velcro - Part
Bb
(attaches to car seat)
Pre-attached
to back of
Base Unit-Part B
Learn Button
