Documentation KNXEASY
22
b.a.b-technologie gmbh
KNXEASY version. 1
ALARMS PHYSICAL ADDRESS
Alarms Configuration
This field contains the list of alarms you have configured, up to 50 alarms.
Figure 24: Alarms list
Click on “Add” to add a new alarm, on “Edit” to edit an existing alarm and on “Delete” to delete an alarm.
An alarm is specified by a KNX Physical Address and a period for which this physical address will be checked.
For example click on “Add” in order to add a new alarm.
Figure 25: Alarm configuration
In the "Physical address" field, you can enter the KNX physical address you want to link an alarm to. Then,
you have to configure the check period:
-
Every x minutes, where x is the period in minute (from 15 to 59 minutes)
-
Every x hours, where x is the period in hour (from 1 to 23 hours)
-
Every day at x, where x is the time at which the physical address will be checked every day.