Configurations Intercom stations
Documentation
INTERCOMMODULE
28 BAB TECHNOLOGIE GmbH
INTERCOM
MODULE
CALL BUTTONS
5.3
Here you can assign the call buttons to the indoor and outdoor stations. The call buttons must
previously been configured in the outdoor system software. How to configure the call buttons in the
software of outdoor system refer to the documentation of the outdoor system.
Click on "Add" to connect a call button via its individual SIP ID to the associated outdoor station.
Continue to assign the call button to the (already configured) indoor station (s) by selecting them under
"Assign Indoor Units". Up to 18 different call buttons can be configured.
Figure 23: Configuration call buttons
CONFIGURATION FOR EIBPORT
5.4
In order to adopt the settings for the indoor station at EIB
PORT
, now can be generated a TOKEN. This
TOKEN must be copied to insert it into the configuration of the visualization at EIB
PORT
.
