Dokumentation
INTERCOM
MODULE
Configuration INTERCOMMODULE
INTERCOM
MODULE
BAB TECHNOLOGIE GmbH 19
USER ADMINISTRATION
4.4
The user data required to access the
INTERCOM
MODULE Web interface is managed here. To change or
add users, click “User administration” in the “Configuration” menu item.
Note: Make sure that you always assign secure passwords and follow standard password
guidelines.
DISABLE PASSWORD RECOVERY
If this option is selected, the password cannot be reset and the device must be sent in if you lose the
password.
Figure 13: User administration
REMOTE SERVICING
4.5
Remote Servicing is available as of firmware version 1.3.7.
Activate the Remote Servicing Access of the
INTERCOM
MODULE. Select a time between 2-12 hours
after which the Remote Servicing Access is automatically closed. Remote Servicing Access is also
deactivated again if the
INTERCOM
MODULE is restarted; this is independent of the set time. Remote
Servicing Access can be deactivated at any time by clicking on "Deactivate Remote Servicing Access".
Activate the Remote Servicing Access by clicking on "Activate Remote Servicing Access".
Remote Servicing access is started. This process takes a few seconds and the Remote Servicing Access ID
is displayed. Copy the ID and send it to