Dokumentation
INTERCOM
MODULE
Initial operation
INTERCOM
MODULE
BAB TECHNOLOGIE GmbH 15
The view on the home page is changing. Now you can reach the following levels:
Intercom Configuration
Configuration
Information
Log Out
To change the IP address of the
INTERCOM
MODULE please click on "CONFIGURATION"
Figure 9: Web interface – open configuration
The configuration menu opens. In the menu item "Network" the following settings can be done:
IP-address/ subnet
mask / gateway:
Field for the static assignment of IP addresses. Please make also sure that the
subnet mask (often 255.255.255.0) and the gateway entry are correct. (Often
the IP address of the WLAN router).
Note: Without a correct gateway entry, the device will not be able to
communicate with the Internet.
DNS server:
DNS is the abbreviation for Domain Name System. The DNS server converts
Internet addresses, for example "www.bab-tec.de" into the IP addresses
"85.214.89.170" and vice versa. Without a valid DNS entry, NTP-, weather- or
UPnP services do not work.
(Often the IP address of the router. Alternatively, you can enter a public DNS
server).
NTP server:
NTP is a free service for synchronising the system time of Internet-compatible
devices. If it is not possible to establish the connection to an NTP-Server, the
system time must always be checked and adjusted manually.
NTP-Server list: e.g.
http://www.pool.ntp.org/zone/europe
