Initial operation
Documentation
INTERCOMMODULE
10 BAB TECHNOLOGIE GmbH
INTERCOM
MODULE
3
INITIAL OPERATION
If the
INTERCOM
MODULE has been mounted and started as described in chapter "
", now can
be continued the commissioning as specified below.
Factory setting by delivery:
IP-address
192.168.1.221
Subnet mask
255.255.255.0
Username
Admin
Password
Admin
Device name
INTERCOM
MODULE
Note: The password must be changed immediately when logging in for the first time. If the
password is lost, the device cannot be reset!
LANGUAGE
3.1
Web interface
The language used for the
INTERCOM
MODULE Web interface is based on the language set in the
browser. German and English are currently available in the
INTERCOM
MODULE. If the browser is set to a
language other than German or English, English is displayed in the
INTERCOM
MODULE interface.
SYSTEM REQUIREMENTS
3.2
Current browser (e.g. Firefox, Chrome, Safari etc.)
Do not use Internet Explorer