The Gateway
DUO
DMX
GATEWAY
8 BAB TECHNOLOGIE GmbH
DUO
DMX
GATEWAY
2.1
VARIANTS
Standalone device variant (item no. 12041)
As a standalone device, the Gateway receives the DMX commands via the smartphone APP “DUO DMX
APP”. The device is connected to the network via a LAN cable.
WLAN standalone device variant (item no. 12041w)
It is similar to the standalone variant. The DUO
DMX
GATEWAY is connected with the network via WLAN
instead of LAN.
IP device variant (item no. 12011)
As IP variant, the device receives its control commands via the “KNXnet/IP” protocol.
The KNX telegrams are sent and received via the KNXnet/IP routing protocol.
Therefore, the device must be connected with the network.
IP WLAN device variant (item no. 12011w)
It is similar to the IP variant. The DUO
DMX
GATEWAY is connected with the network via WLAN instead of
LAN.
IP SR device variant (item no.: 12111)
The IP SR variant does not only allow for the sending of DMX commands due to incoming KNXnet/IP
telegrams (see IP variant above) but also sends KNXnet/IP telegrams due to incoming DMX commands.
The KNX telegrams are sent and received via the KNXnet/IP routing protocol.
Therefore, the device must be connected with the network. The master/slave function (send/receive)
can be adjusted separately for each DMX interface.
IP SR WLAN device variant (item no.: 12111w)
It is similar to the IP SR variant. The DUO
DMX
GATEWAY is connected with the network via WLAN instead
of LAN.
KNX device variant (item no.: 12021)
As KNX twisted pair variant, the device is directly connected with the KNX bus.
The KNX telegrams are sent and received via the KNX bus.
In addition, KNX telegrams can also be received via network using the KNXnet/IP routing protocol.
For operation, network connection is not required.
KNX SR device variant (item no.: 12121)
The KNX SR variant does not only allow for the sending of DMX commands due to incoming KNX/TP
telegrams (see KNX variant above) but also sends KNX/TP telegrams due to incoming DMX commands.
The master/slave function (send/receive) can be adjusted separately for each DMX interface.
The KNX telegrams are sent and received via the KNX bus.
In addition, KNX telegrams can also be received via network using the KNXnet/IP routing protocol.
For operation, network connection is not required.
EnOcean device variant (item no.: 12031)
As EnOcean variant, the device receives the control signals via the EnOcean radio system. The device
only requires power supply. Moreover, an external antenna must be connected to the device. The
DMX-
Configurator
software enables the connection with the EnOcean profiles. For operation, network
connection is not required.
KNX SR device variant REG (item no.: 12521)
The "KNX SR REG" variant is largely identical to the KNX SR device variant (item no.: 12121).
