DUO DMX
Gateway
Programming
DUO DMX
Gateway
b.a.b-technologie gmbh 31
The DUO DMX Gateway in the EnOcean variant, supporting the profiles” ORG0x5 ". These profiles
correspond e.g. Touch sensors or window handles. To delete a received profile delete from the list, it
must be marked and removed with the "
Del
" key. The profiles are named and light scenes are set,
simply drag and drop the profiles to the desired channels or scenes.
Linking the scenes
In case of EnOcean the scenes will be launched and stopped with the same profile. That means one
rocker switch can start and stop (or pause) two different scenes. The behavior of the scenes in a "
stop
"
message is in the tab "
Lan/EnOcean
" can be determined.
Figure 41: EnOcean – Linking of scenes
More than one profile can be linked to a scene. To delete a link, it is enough to mark it and then press
the "Del" key.
Linking DMX channels
To link the DMX dimming channels in the DMX outputs directly with EnOcean profiles both profiles of a
rocker switch must be linked to each channel.
Figure 42: EnOcean – linking of DMX channels
The DUO DMX gateway detects a dim-signal when a rocker switch is pressed for longer than 500ms,
and ended it as soon as the button is released. The dimming up is done by holding the "ON" switch of
the rocker, the dimming down by holding the "OFF" switch.
