IR-B02 Page 10
equipment and facility engineering
6. Troubleshooting
Problem:
Cause:
Troubleshooting:
Uneven baking
The emitter is not as high as the
repaired surface
Adjust the emitter to allow it to be
as high as the repaired surface
Small pores on the
baked surface
Too near between the emitter
and the repaired surface
Insufficient Preheating time
Fast thinning agent included in
the paint
Increase the distance
Increase the preheating time
Use standard or slow thinning agent
Poor curing or
transparent coating
Too far between the emitter and
the repaired surface
Insufficient baking
Too thick coating
Make the machine closer
Increase the baking time
Thin the coating
Difficult stains
Too long baking
Too near distance
Shorten the baking
Increase the distance
Fuzzy Edge
The repair surface is too large
Curing in two steps
Move the device for second step
Preheating for first time and do not
use preheating for second time
For optimal baking performance, we recommend that users should work out the suitable operating
procedures, baking time and distance according to the local natural conditions, working environment
and the types of paints.
Above specifications, exterior or diagrams are descriptive and subject to revision. If there are any
discrepancies or changes, actual products shall prevail without otherwise notification.
