manualshive.com logo in svg

B.Pro SAW 1, Перевод оригинальной инструкции по эксплуатации, Страница: 39 / 56

Поделиться
Скачать
B.Pro SAW 1 Скачать руководство пользователя страница 39

 39 

B.PRO food serving trolley / cutlery soaking trolley

 

OPERATING INSTRUCTIONS

Troubleshooting

Cause

Measure

Mains plug is disconnected or not 
plugged in properly.

 

–

Plug the mains plug into the socket outlet and 
ensure it fits properly.

Mains cable is damaged; e.g. a wire is 
broken (may also occur without external 
damage).

 

–

Have a centre authorised to carry out repairs 
replace the mains cable.

 

ª

Chapter "Repairs" on page 48

Customer-supplied fuse (building fuse) is 
defective.

 

–

Check customer-supplied fuse and replace it if 
necessary.

Unit electrical system is defective.

 

–

Notify a centre authorised to carry out repairs.

 

ª

Chapter "Repairs" on page 48

Cause

Measure

Setpoint temperature is set too low.

 

–

Set a higher setpoint temperature.

 

ª

Chapter "Setting the setpoint temperature" 
on page 27

Unit is exposed to a (strong) draught.

 

–

Eliminate the cause(s) of the draught or move 
the unit away from the draught.

Unit electrical system is defective.

 

–

Notify a centre authorised to carry out repairs.

 

ª

Chapter "Repairs" on page 48

Cause

Measure

Defective radiant heaters.

 

–

Notify a centre authorised to carry out repairs.

 

ª

Chapter "Repairs" on page 48

Unit is exposed to a (strong) draught.

 

–

Eliminate the cause(s) of the draught or move 
the unit away from the draught. 

Unit electrical system is defective.

 

–

Notify a centre authorised to carry out repairs.

 

ª

Chapter "Repairs" on page 48

Cause

Measure

Incorrect handling/care.

 

–

Notify a centre authorised to carry out repairs.

 

ª

Chapter "Repairs" on page 48

 

–

Ensure proper handling/care.

 

ª

Chapter "Cleaning and care" on page 40

Cause

Measure

Damage during transport, change of  
location or other external influences.

 

–

Shut unit down.

 

ª

Chapter "Shutting down" on page 37

 

–

Secure the unit to ensure it cannot be started 
up accidentally.

 

–

Notify a centre authorised to carry out repairs.

 

ª

Chapter "Repairs" on page 48

Operation indicator LEDs 

do not light up – no mains 

voltage in the unit

"Bain-marie well heating" 

operation indicator LEDs 

light up,  

but food is not kept hot 

enough

"Radiant heater" 

operation indicator LEDs 

light up, 

 but food is not kept hot 

enough

Corrosion of stainless 

steel parts

The unit has external 

damage

Содержание SAW 1

























































Отзывы:

Нет отзывов