manualshive.com logo in svg

B.Pro SAW 1, Руководство по эксплуатации

Поделиться
Скачать
B.Pro SAW 1 Скачать руководство пользователя страница 37

B.PRO Food Distribution Carts SAW/SAG/BTW9x7

– 33 –

In order to close the shut-off cock turn the rotary handle clockwise until 
the center link is positioned horizontally. 

Rub the Bain-Marie basin dry.

Removing areas of corrosion on

stainless steel

New areas of corrosion

Ensure that the power plug is unplugged.

Remove areas of corrosion with a scouring agent or fine sandpaper.

Older and more severe areas of corrosion

I

The cleaning measures described here for older and more severe areas 
of corrosion are recommendations of the German industry association for 
home, heating and kitchen technology (Industrieverband Haus-, Heiz- 
und Küchentechnik e. V., HKI).

The cleaning measures for older and more severe areas of corrosion may 
only be carried out by trained personnel in compliance with the existing 
regulations.

Warning!

Caustic substances!

The acids used for removing areas of corrosion can cause injuries and also 
caustic damage to objects (e.g. clothing). Contact with the eyes can cause 
irreparable impairment of sight. In the worst case, total loss of sight could 
result.

Wear protective clothing (protective eyewear, protective gloves etc.).

Persons not involved in cleaning must be kept at a distance.

Ensure that the power plug is unplugged.

Remove areas of corrosion with 2–3 % oxalic acid.

Use 10 % nitric acid if cleaning with oxalic acid is unsuccessful.

Содержание SAW 1

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды