50
COOK I-flex
OPERATING INSTRUCTIONS
Warning!
Fire hazard
There is a fire hazard if naked flames are sucked in with the fume extraction module, as produ-
ced when food is flambéed or cooked on an open fire, for example.
Under no circumstances flambé food or produce naked flames beneath the fume extractor.
Caution!
Danger of slipping and risk of damage to floor
Moisture produced by cooking escapes with the exhaust air from the odour filter box. Conden-
sation may form in the floor area beneath the odour filter box if moisture levels are high and floor
temperatures are low. This may cause danger of slipping and risk of damage to the floor.
Regularly wipe up condensation water on the floor.
Switch on unit and extraction and select desired power step.
Filter change/cleaning intervals greatly depend on the unit's conditions of use. It is impossible to
see whether the filters are saturated or not. B.PRO recommends cleaning or replacing the filters
when odour filtering becomes less effective during normal operation. The filter change indicators
on the B.PRO Control control electronics can be used for guidance. The different programs are
assigned the following interval periods:
Change/cleaning intervals in operating hours
Range
P1
P2
P3
Degree of exposure
Light
Normal
Strong
Clean ION TEC filter
150
100
75
Replace charcoal filter pad
(without ION TEC)
450
300
225
Replace charcoal filter pad
(with ION TEC)
900
600
450
Change/cleaning intervals in days
Range
P1
P2
P3
Degree of exposure
Light
Normal
Strong
Clean ION TEC filter
30
30
30
Replace charcoal filter pad
(without ION TEC)
180
180
180
Replace charcoal filter pad
(with ION TEC)
360
360
360
L
The interval times continue to elapse even if the unit is not in use.
Filter change/cleaning
interval
