B.Pro B.PROTHERM BPT 820 EB, Перевод оригинальной инструкции по эксплуатации, Страница: 6 / 48

B.PROTHERM stainelss steel, heated
– 2 –
Operation
The B.PROTHERM stainless steel, heated can be loaded with Gastronorm
containers of type GN 1/1. Their subdivisions can also be used by fitting a
slide-in frame and support crossbars (accessory).
A removable convection heating module is located in the unit door.
The convection heating module has a power cable with power plug, an On/
Off switch for starting end ending temperature maintenance and a separate
temperature regulator.
The temperature control is based on a mechanical capillary-tube thermostat.
The desired setpoint temperature in the unit can be set continuously via a
rotary knob. The maximum setting of "10" corresponds to a temperature of
approx. +90 °C.
The interior temperature can be read via an analogue temperature display
from the outside. The moisture inside the unit can be regulated with a flap
mechanism.
A safety push handle allows easy movement of the unit on two fixed castors
and two steering castors with castor brakes. Stable corner guards protect the
unit from damage.
The B.PROTHERM stainless steel, heated models differ with regard to the
following features:
B.PROTHERM 820 EB

Acceptance of max. three Gastronorm containers of type GN 1/1-200
(example)

Front loader
B.PROTHERM 820 EBFT

Acceptance of max. three Gastronorm containers of type GN 1/1-200
(example)

Top and front loader (food transport with additional distribution option)
B.PROTHERM 1020 EB

Acceptance of max. three Gastronorm containers of type GN 1/1-200
and 1 Gastronorm container GN 1/1-100 (example)

Front loader
B.PROTHERM 1220 EB

Acceptance of max. five Gastronorm containers of type GN 1/1-200
(example)

Front loader
Standard model The B.PROTHERM stainless steel, heated is equipped as follows (standard):

All-round bumper rail

Two steering castors and two synthetic fixed castors; steering castors
feature castor brakes