B.Pro B.PROTHERM BPT 820 EB, Перевод оригинальной инструкции по эксплуатации, Страница: 5 / 48

B.PROTHERM stainelss steel, heated
– 1 –
About this product
Application The B.PROTHERM stainless steel, heated is designed for the following
applications:

Temperature maintenance of food in Gastronorm containers

Transporting food in Gastronorm containers

Food servery (B.PROTHERM 820 EBTF only)

Refrigeration of food in Gastronorm containers in combination with
eutectic plates (coolant accumulators)
The B.PROTHERM stainless steel, heated is not suitable for heating up or
cooking food.
The B.PROTHERM stainless steel may only be used for the storage and
transport of food in containers.
Storage and transport of flammable goods or goods which have a negative
effect on food is not permissible.
The convection heating module may only be operated while installed to the
B.PROTHERM stainless steel, heated.
The B.PROTHERM stainless steel, heated is particularly suitable for use in
social facilities (clinics, retirement homes, day care centres), hotels, the food
service industry (banquets, party services) and in cafeterias (canteens, dining
halls).
It is forbidden to transport persons with or on the unit or its attachments. The
unit must not be used as a substitute for a ladder or as a (children's) climbing
frame (danger of tipping).
The unit may not be used to transport or store dangerous or toxic
substances/liquids.
Conditions of use Environment
The unit may be used when the ambient temperature is b15 °C and
+38 °C and at normal humidity (without moisture condensation).
Instruction of third parties
If the unit is lent to third parties, these persons must be instructed in the safe
handling of the unit and possible dangers must be pointed out.
Product features General information
The B.PROTHERM stainless steel, heated is made of stainless steel as
standard.
The unit body is double-walled and insulated.
Depending on the model, the interior features 11, 14 or 20 pair of deep-
drawn support ledges.
The indentations located on the rear wall guarantee even circulation of the hot
air when loaded with Gastronorm containers.
The front of the unit is closed by a double-walled unit door. The unit door,
which can be removed if necessary, is equipped with either one or two bent-
clamp closures.
A condensation collection groove is located below the unit door.