5
2.2
External Timed Program
External Timed Program is completely controlled by the PC. The PC counts the step time and changes the specified
voltage and current levels of the power supply.
Figure 2.4 - External Timed Program
External Timed Program Procedure
1.
Select the External Timed Program tab to switch to the External Timed Program tab.
2.
Set voltage, current, and time parameters for number of steps (max 20) needed in timed program. Values
can be configured using the slide bar or set incrementally by pressing the left and right arrow keys on your
keyboard.
3.
Specify desired number of running cycles. Up to 999 running cycles can be entered. Enter 0 for continuous
cycle.
4.
To run the timed program, click the “Run” button. During running cycles, the “Stop” button can be clicked
to stop the program.
5.
To save and export the table to a '.csv’ file, enter Table Name in text box and click the “Save” icon. The
timed program table data can be retrieved or printed by clicking the “Load” and “Print” icons.
6.
To delete all data in the table, click the “Clear Table” button.
