B-K Medical Pro Focus 2202, Руководство пользователя

Страница: 39 / 356

Getting Started 39
To save a description from the worklist:
1 Open the Patient window again.
2
Click Edit. See “Re-opening Patient window” on page 37.
3 Type the description from the worklist into the Description field.
Worklist not
updated
Changes in patient data fields (except PSA) are transferred back to the DICOM
system when you save (store) a scanned image, but the worklist is not updated.
NOTE : Any information you enter after you re-open the Patient window will not be
transferred to the DICOM system.
Entering Dates
The Patient window contains one or more date fields. Dates in these fields can be
displayed in various formats.
Table 2-1. Possible date formats.
The date format is set up in the General Setup window, but you probably will not
need to change it. See “Date/Time” on page 172.
Use number
keys
Use the number keys on the keyboard to enter dates.
NOTE: You cannot type letters in a date field, even when the month is displayed
in letters. In the example in Table 2-1, you must type 11 for the month, even it if
is displayed as “Nov”.
To enter dates in date fields:
1 Put the cursor at the beginning of the date field.
2
Type the date (or number of the month, if your system is set to display month
first).
3 Type a separator or press
→
to move to the next part of the date. You can use any
of the following separators: period (.), comma (,), hyphen (-) and slash (/). (The
separator you use when you enter a date does not affect the way the date is
displayed in the field.)
4
Type the appropriate number.
5 Repeat steps 3 and 4.
Format Example
dd-MM-yyyy 18-11-1944
dd MMM yyyy 18 Nov 1944
MM/dd/yyyy 11/18/1944
MMM/dd/yyyy Nov/18/1944