B-K Medical Pro Focus 2202 Скачать руководство пользователя страница 162

Страница: 162 / 356

162 Chapter 12

To adjust CW Doppler mode gain:

•

Turn the

[

M/Doppler Gain

]

dial.

•

Click Gain under Doppler on the left side of the screen and drag the slider (or
point at Gain and press

[

+/-

]

The current Doppler gain setting (a percentage) is displayed on the screen next
to Gain.

Wall Filter

In CW Doppler mode, you can set the cutoff frequency for the wall filter.

To set the cutoff frequency for the wall filter:

•

Click Wall Filter under Doppler on the left side of the screen and select the
value you want (or point at Wall Filter and press

[

+/-

]

•

Press

[

Filter

]

to step through the available values.

The current setting is displayed on the screen next to Wall Filter.

Invert

In CW Doppler mode, you can invert the spectrum on the screen.

To invert the spectrum or to return to the default:

•

Press

[

nverse

]

to toggle between the default and inverted color coding.

The frequency axis is inverted to match the spectrum.

Baseline

In CW Doppler mode, you can reposition the baseline. The baseline separates
forward flow from reversed flow, and moving the axis can help overcome aliasing
problems.

To adjust the baseline:

•

Press

[

Baseline

]

to move the baseline up or down.

The frequency axis is updated to match the spectrum.

Sweep Speed

You can adjust the sweep speed to change the number of cycles of the spectrum
displayed on the full time axis.

Содержание Pro Focus 2202





































































































































































































































































































































































Результаты поиска

Содержание Pro Focus 2202

Отзывы:

Похожие инструкции для Pro Focus 2202

Бренды по названию

Популярные бренды

B-K Medical Pro Focus 2202, Руководство пользователя

Результаты поиска

Содержание Pro Focus 2202

Отзывы:

Похожие инструкции для Pro Focus 2202

Бренды по названию

Популярные бренды