2
LUXOMAT
®
ALC-B-360 DECO SLS
3
4
1
1
2
Installation and Operating Instruction for Automatic-system-light LUXOMAT
®
ALC-B-360 (DECO) SLS with motion detector
4.
Putting into operation / Settings
Twilight-switch for light control / follow-up time
Infinitely variable setting from approx. 4 sec.
to approx. 10 min.
1. Assembly ALC-B-360 SLS
3. Attaching the system glass
1) Un-fasten the stud screws (1)
2) Put system glass on socket ring (2)
3) Fasten the screws equally on all sides until the
system-glass is firmly attached (3).
5. Mounting types
1) Wall mounting
6. Range control
Detection area can be
adapted to the local
circumstances by turn-
ing the round optics.
1) Detach lighting part from the base by means
of a screwdriver (a)
2) Insert the cable, from the bottom (b) or from
the back here
3) Connect the cables as indicated by the termi-
nal labels (see point 13 for wiring diagrams)
4) Attach the assembly base with two screws (c)
5) Screw in incandescent lamp E27/100 W
6) Secure system glass to system light lower
section (see point 3)
2. Installation
7.
Sensitivity adjustment (mounting height 1.80 m)
1) Range walking across:
approx. 10 m
2) Range walking towards:
approx. 8 m
1) If possible mount unit on a safe place.
2) Influence of weather reduces the lifetime
of the unit. Please take care to mount
correctly.
8.
Mounting place
walking across
walking towards
anti-creep
1
2
quer zum Melder gehen
frontal zum Melder gehen
Unterkriechschutz
quer zum Melder gehen
frontal zum Melder gehen
Unterkriechschutz
quer zum Melder gehen
frontal zum Melder gehen
Unterkriechschutz
1) System light lower section can be freely
combined with 17 different System-Globes SG
2) Socket ring with stud screws
3) Horizontally and vertically swivelling sensor
head
4) Decorative LED secondary light (only ALC-B-
360-DECO SLS) switchable by remote control
5) Plug-in connector base
5
a
b
c
c
Arrow position left: approx. 4 sec.
Arrow position right: approx. 10 min.
Photo electric switch
Infinitely variable setting from approx. 2 to
approx. 1000 Lux by turning.
Arrow position on symbol “moon“
night-time operation, approx. 2 Lux
Arrow position on symbol “sun“
daytime operation, approx. 1000 Lux
2) Outside corner mounting with plug-in socket
3
1
2
DECO
(only ALC-B-360-DECO)
If below set light value (60 sec.),
the LED will switch on.
120°
8 m
10 m
6 m
4 m
1.80 m
1
2
GB
