13.
FLAT-P-PP-A-FC - Connection
Connect the B.E.G. Controls FLAT-P-PP-A-FC sensor
to the PP-A-J or PP-1-J power pack using the sensor’s
RJ12 connector.
14. Wiring diagrams with Power
pack PP-A-J and PP-1-J
Standard mode with Primary/Secondary
!
Secondary sensors and primary sensor must be
connected to the same power pack.
15. Reset of the detector
Following settings can only be changed using the
B.E.G. Controls IR-Adapter for smartphones and
app.If the configuration settings lock is activated,
the detector can be released again as follows:
• Disconnect and reconnect sensor from power
pack
• Let sensor initialize for about 31 to 59 seconds
• Disconnect sensor from power pack
• Connect sensor back to power pack and wait
for the sensor to go through self-testing
• Press the unlock button
Pressing the „RESET“ button on the remote control,
in programming open mode, will delete all of the
values set by the remote control. Sensor settings
will be set back to factory settings. 50 fc (500 Lux),
10 minute timeout.
B.E.G.
Controls
277 Highway 74 N, Suite 319
Peachtree City, GA 30269
Phone: 770-349-6341
Email: [email protected]
MAN 9
08
6-111016_1
Controls
B.E.G.
Hot
White
Black
Neutral
Brown
Orange
Gray
Red
Y / B
Y
Y / R
HVAC
Load
PB
PB PB
Power Pack
Switch
PP-A-J
LED Switch
RJ 12
RJ 12
RJ 12
6
S
Secondary
P
Primary
All Off
HVAC
Load
Red
Red
120 - 277 VAC
24 VDC
max. 200 mA
RJ12 male
to dual
RJ12
female
splitter
Hot
White
Black
Neutral
Gray
Red
Load
PB
Power Pack
Switch
PP-1-J
LED Switch
RJ 12
RJ 12
RJ 12
6
S
Secondary
P
Primary
Load
Red
Red
120 - 277 VAC
24 VDC
max. 200 mA
RJ12 male
to dual
RJ12
female
splitter
RJ12
