B DUTCH RVS BD700.000004, Руководство по установке

Страница: 5 / 10

5
Installation Requirements
Please read the instructions carefully so as to avoid any damage to the fixture.
1. To ensure this product is installed properly, you must read and follow these guidelines.
2. Ensure that the product is installed properly before the use.
3. Recommended operational pressure 1,5 a 5 Bar.
4. Avoid pressure swings between cold and hot water fittings in the case of static pressures above 5
Bar is recommended to install a flow reducer to avoid damage to the cartridge.
5. Maximum test pressure 5 Bar.
6. Maximum hot water temperature 80° C.
7. Recommended temperature 50°- 60° C.
8. Pressure difference between hot and cold water max 1,5 Bar.
9. The owner/user of the faucet must keep this information for future reference.
10. Be sure your installation conforms to local codes.
11. Refer to the specification and assembly drawings attached. Faucet is sold partially assembled but
shown fully disassembled for illustrative and service purposes only.
12. Inspect this product to ensure you have all parts required for proper installation.
13. Use only a strap wrench or protected/smooth- jaw wrench on any finished surface.
14. If possible, install the faucet assembly on the sink or mounting surface before setting.
15. Do NOT use putty during this installation.
N.B.: If the above conditions do not exist, the product may not work efficiently. Any flaws in the surface finish
(scratches, etc.) must be identified prior to installation of the product. No replacement will be acknowledged after
installation.