B. Braun Infusomat compact plus Скачать руководство пользователя страница 21

Страница: 21 / 60

Set-up and start-up

7.1.5

Connecting the device to the

mains electricity

DANGER! Risk of death from electric

shock.

Connect the power cable with mains
connection to the device.

Position the power cable so that it
does not present a trip hazard.

Plug the mains plug into the socket.

7.1.6

Operating the device on

battery power

Ensure that the battery in the device is
fully charged.

7.2

Powering on the device

for the first time

Device switched on

Select and insert the line

see section 8.2.

Configure additional device settings,
see section 7.3.

7.3

Configure device options

Device switched on

No patient connected

No ongoing infusion

Press the

Menu key.

The

main menu

is displayed.

Select

Settings...

and press

confirm.
The “Settings” screen is displayed.

7 Set-up and start-up

7.1

Setting up and connecting

the device

7.1.1

Attach/remove the compact

plus

pole clamp

Note:

The compact

plus

pole clamp is fixed

to the device.

The compact

plus

pole clamp should

only be removed or re-attached by a
service technician.

7.1.2

Operating the device on a stand

Press the lever on the compact

plus

pole clamp.
Turn the compact

plus

pole clamp to

the desired position.

Turn the compact

plus

pole clamp until

the lever clicks into place.

7.1.3

Operating the device in the

compact

plus

station

Follow the compact

plus

station

instructions for use.

7.1.4

Operating the device on a wall rail

Press the lever on the compact

plus

pole clamp.
Turn the compact

plus

pole clamp to

the desired position.

Turn the compact

plus

pole clamp until

the lever clicks into place.

Make sure that the compact

plus

pole

clamp is not fixed at the point where
the wall rail is attached to the wall.

Содержание Infusomat compact plus





























































Результаты поиска

Содержание Infusomat compact plus

Отзывы:

Похожие инструкции для Infusomat compact plus

Бренды по названию

Популярные бренды

B. Braun Infusomat compact plus, Инструкция по эксплуатации

Результаты поиска

Содержание Infusomat compact plus

Отзывы:

Похожие инструкции для Infusomat compact plus

Бренды по названию

Популярные бренды