12
Safety instructions
Q
Only use disposable items and acces-
sories that are intended for this pur-
pose and are labelled as such for the
transfusion.
4.2
Electrical connection
Q
Do not use the device if the plug has
visible damage.
Q
Do not use an extension cable that
has not been approved for use with
device. Position the power cable so
that it does not present a trip hazard.
4.3
Safety standards
Q
The device meets all safety standards
for medical electrical equipment in
compliance with
IEC/DIN EN 60601-1 and
IEC/DIN EN 60601-2-24.
Q
It complies with the EMC threshold
limits as specified in
IEC/DIN EN 60601-1-2 and
IEC/DIN EN 60601-2-24.
Q
See the corresponding manufacturer
information for possible incompatibili-
ties between the device and medicinal
products.
Q
Use only Luer lock, ENFit or NRFit
feed systems, and use only compatible
combinations of devices, accessories,
wear parts and disposable items.
Q
Connected electrical components must
comply with IEC/EN specifications
(e.g., IEC/DIN EN 60950 for data pro-
cessing equipment). Anyone who con-
nects additional devices is considered
a system configurer, and is therefore
responsible for compliance with sys-
tem standard IEC/DIN EN 60601-1-1.
Q
If more than one appliance/infusion
line is connected, mutual interference
cannot be ruled out.
Note:
The use of untested or incompatible
disposable items can affect the technical
data.
4.1.9
Enteral nutrition
The Infusomat compact
plus
can be used for
enteral nutrition.
Q
Do not use enteral fluids for the intra-
venous infusion. This would lead to a
risk of severe injury or death for the
patient.
Q
Only use ENFit feed systems that have
been designed and designated for
enteral nutrition.
4.1.10
Transfusion
The Infusomat® compact
plus
can also be
used for the transfusion of blood and blood
products.
