B+B SmartWorx V3, Руководство по настройке

Страница: 52 / 112

4. CONFIGURATION
Enable the following options and enter the port number is allowed remote access to the
router from the Internet.
Attention! Enable remote HTTP access on port activates the redirect from HTTP to
HTTPS protocol only . Router doesn’t allow unsecured HTTP protocol to access the web
configuration. To access the web configuration, always check the Enable remote HTTPS ac-
cess on port item. Never enable the HTTP item only to access the web configuration from the
Internet (configuration would not be accessible from the internet). Always check the HTTPS
item or HTTPS and HTTP items together (to set the redirect from HTTP).
Item Description
Enable remote HTTP access on port This option sets the redirect from HTTP to
HTTPS only (disabled in default configuration).
Enable remote HTTPS access on port If this item field and port number is filled in, then
configuration of the router over web interface is
possible (disabled in default configuration).
Enable remote SSH access on port Choice this item and port number makes it pos-
sible to access over SSH (disabled in default
configuration).
Enable remote SNMP access on port Choice this item and port number makes it pos-
sible to access to SNMP agent (disabled in de-
fault configuration).
Masquerade outgoing packets Choice Masquerade (alternative name for the
NAT system) item option turns the system ad-
dress translation NAT.
Table 32: Remote access configuration
Example 1:
Configuration with one connection equipment on the router.
Figure 28: Example 1 – Topology of NAT configuration
43