SmartSwarm 300 Series
:
26
NOTE
that the address field in our template is declared as the offset from the base address of the register type. In
our example the device uses the 10,xxx range for its Input Status registers. (Other devices may use 10x,xxx.) So the
first IS register (10,001) corresponds to offset 0. Hence the device register 10,003 becomes our IS register 2.
Here’s an example of the Modbus “Input Registers” section of the datasheet:
Table 3. Example Modbus Slave Datasheet for Input Registers
We derived the following “Input Registers” Excel sheet information from this Datasheet, using the provided Excel
Template:
