manualshive.com logo in svg

B+B SmartWorx SE400 Series, Руководство пользователя

Поделиться
Скачать
B+B SmartWorx SE400 Series Скачать руководство пользователя страница 55

42

SE400 SERIES

The ensuing table for 

Port Status

 settings are informational only: Port, 

Edit

 (click to enter

description), Enable State, Link Status, Speed, Duplex, FlowCtrl Config and FlowCtrl Status.

Port mirroring function allows the sending of a copy of network packets seen on one switch
port to a network monitoring connection on another switch port. Port mirroring can be used to
analyze and debug data or diagnose errors on a network or to mirror either inbound or out-
bound traffic (or both).

There are no preset values in the Port Mirror. The displayed values do not represent the
actual setting values.

To access this page, click 

L2 Switching

 > 

Port Mirror

.

Figure 46: L2 Switching > Port Mirror

The following table describes the items in the previous figure.

The ensuing table for 

Mirror Status

 settings are informational only: Session ID, Destination

Port, Ingress State, Source TX Port and Source RX Port.

Flow Control

Click the radio button to enable or disable the flow control function.

Apply

Click 

Apply

 to save the values and update the screen.

Port Mirror

Table 29: L2 Switching > Port Mirror

Item

Description

Session ID

Click the drop-down menu to select a port mirroring session from the list. 
The number of sessions allowed is platform specific.

Monitor session state

Click the drop-down menu to enable or disable the session mode for a 
selected session ID.

Destination Port

Click the drop-down menu to select the destination port and receive all the 
traffic from configured mirrored port(s).

Allow-ingress

Click the drop-down menu to enable or disable the Allow-ingress function.

Sniffer RX Ports

Enter the variable to define the RX port.

Sniffer TX Ports

Enter the variable to define the TX port.

Apply

Click 

Apply

 to save the values and update the screen.

Table 28: L2 Switching > Port Configuration (Continued)

Item

Description

Содержание SE400 Series





















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды