1-888-948-2248 |
Europe:
+353 91 792444
advantech-bb.com
707 Dayton Road | PO Box 1040 | Ottawa, IL 61350
Phone: 815-433-5100 | Fax: 815-433-5109
www.advantech-bb.com | E-mail: [email protected]
Fast and easy on the web:
www.advantech-bb.com
QUICK START
GUIDE
Document Number: 710-11429-00_R0_ABDx-ER-IN50xx_0817qsg
Before you begin, be
sure you have the following:
ABDN-ER-IN501x
Industrial Wireless Ethernet Bridge/Router
+ Wireless Ethernet Bridge/Router Product
(ABDN-ER-IN5010 or ABDN-ER-IN5018)
+ CD with Airborne Management Center
Software
+ 50 Ohm, omni-directional antenna
+ 5-36 VDC power for terminal block or a 5
VDC power supply (not included)
LED
Color
Airborne Device State
POWER
Off
Adapter is not powered.
Blue
Adapter is powered.
POST
Off
Adapter is not powered.
Red
Adapter failed Power On Self Test (“POST”) and is not configured for
wireless communication.
Amber
Adapter passed POST but is not configured for wireless network
communication.
Green
Adapter passed POST and is configured for wireless communication.
LINK
Off
Adapter is not powered.
Red / Off
(Periodic Blinking) Adapter is searching for a valid network
(Access Point) that matches device’s configuration.
Green
Adapter has successfully associated with an Access Point.
COMM
Off
If Power LED is also Off, then Adapter is not powered.
If Power LED is On then, No TCP session from WLAN or Ethernet
interface has been established.
Red /
Blinking
Red
A TCP connection has been established.
If your device is connected and configured correctly, you
will see the following LED Status:
COMM: Red / Blinking Red
LINK:
Green
POST: Green
POWER:
Blue
(Continued)
Check Your Setup
7
Troubleshooting
8
Recommended Accessories
Model MDR-20-24
120VAC/5VDC Power Supply
or
Model PS-WDS
Power Supply with Appropriate
Cord (North America, EU, UK)
Model C5UMB10FBG
Ethernet Cable
