B+B SMARTWORK SPECTRE V3, Руководство по настройке

Страница: 38 / 136

4. CONFIGURATION
4.3 Mobile WAN Configuration
The SPECTRE v3 ERT routers do not display the Mobile WAN configuration option.
Select the Mobile WAN item in the Configuration menu section to enter the cellular network
configuration page.
4.3.1 Connection to Mobile Network
If you mark the Create connection to mobile network checkbox, then the router automati-
cally attempts to establish a connection after booting up. You can specify the following param-
eters for each SIM card separately, or to toggle between the SIM cards, specify two different
APNs.
Item Description
APN Network identifier (Access Point Name)
Username User name for logging into the GSM network
Password Password for logging into the GSM network
Authentication Authentication protocol in the GSM network:
• PAP or CHAP – The router selects the authentication method.
•
PAP – The router uses the PAP authentication method.
•
CHAP
– The router uses the CHAP authentication method.
IP Address Specifies the IP address of SIM card. You manually enter the IP ad-
dress, only when mobile network carrier assigned the IP address.
Phone Number Specifies the telephone number the router dials for a GPRS or CSD
connection. The router uses a default telephone number *99***1 #.
Operator Specifies the carrier code. You can specify the parameter as the PLNM
preferred carrier code.
Network type Specifies the type of protocol used in the mobile network.
• Automatic selection – The router automatically selects the trans-
mission method according to the availability of transmission tech-
nology.
•
Furthermore, according to the type of router – It’s also possible to
select a specific method of data transmission (GPRS, UMTS, . . . )
PIN Specifies the PIN used to unlock the SIM card. Use a PIN parameter
only if the network requires a SIM card router. The SIM card is blocked
after several failed attempts to enter the PIN.
Continued on next page
29