B+B SMARTWORK SmartMotion, Руководство по настройке

Страница: 96 / 144

4. CONFIGURATION
4.18 NTP Configuration
The NTP configuration form allows you to configure the NTP client. To open the NTP page,
click
NTP
in the
Configuration
section of the main menu. NTP (Network Time Protocol) allows
you to periodically set the internal clock of the router. The time is set from servers that provide
the exact time to network devices. IPv6 Time Servers are supported.
• If you mark the Enable local NTP service check box, then the router acts as a NTP server
for other devices in the local network (LAN).
• If you mark the Synchronize clock with NTP server check box, then the router acts as a
NTP client. This means that the router automatically adjusts the internal clock every 24
hours.
Item Description
Primary NTP Server
Address IPv4 address, IPv6 address or domain name of primary NTP
server.
Secondary NTP
Server Address IPv4 address, IPv6 address or domain name of secondary NTP
server.
Timezone Specifies the time zone where you installed the router.
Daylight Saving Time Activates/deactivates the DST shift.
•
No – The time shift is inactive.
• Yes – The time shift is active.
Table 52: NTP Configuration
The figure below displays an example of a NTP configuration with the primary server set
to ntp.cesnet.cz and the secondary server set to tik.cesnet.cz and with the automatic change
for daylight saving time enabled.
Figure 56: Example of NTP Configuration
86