B+B SMARTWORK SmartMotion, Руководство по настройке

Страница: 82 / 144

4. CONFIGURATION
4.13 IPsec Tunnel Configuration
To open the IPsec Tunnel Configuration page, click IPsec in the Configuration section of
the main menu. The IPsec tunnel function allows you to create a secured connection between
two separate LAN networks. The router allows you to create up to four IPsec tunnels. IPv4
and IPv6 tunnels are supported (dual stack), you can transport IPv6 traffic through IPv4 tunnel
and vice versa.
To encrypt data between the local and remote subnets, specify the appropriate values in
the subnet fields on both routers. To encrypt the data stream between the routers only,
leave the local and remote subnets fields blank.
If you specify the protocol and port information in the Local Protocol/Port field, then the
router encapsulates only the packets matching the settings.
Item Description
Create Activates/deactivates the individual IPsec tunnels.
Description Displays the name of the tunnel specified in the configuration of
the tunnel.
Edit Opens the IPsec tunnel configuration form.
Table 41: IPsec Tunnels Overview
Figure 45: IPsec Tunnels List
Item Description
Description Name or description of the tunnel.
Host IP Mode
•
IPv4
– The router communicates via IPv4 with the opposite
side of the tunnel.
•
IPv6
– The router communicates via IPv4 with the opposite
side of the tunnel.
Remote IP Address IPv4, IPv6 address or domain name of the remote side of the
tunnel, based in the
Host IP Mode above.
Continued on next page 72