B+B SMARTWORK SmartMotion, Руководство по настройке

Страница: 58 / 144

4. CONFIGURATION
4.7 WiFi Configuration
This item is available only if the router is equipped with a WiFi module.
Configure the WiFi network by selecting the WiFi item in the main menu of the router web
interface. Activate WiFi by selecting
Enable WiFi
at the top of the form. You may also set the
following properties:
Item Description
Operating mode WiFi operating mode:
•
access point (AP) – The router becomes an access point to
which other devices in station (STA) mode can connect.
•
station (STA) – The router becomes a client station. It receives
data packets from the available access point (AP) and sends
data from cable connection via the WiFi network.
SSID Unique identifier of WiFi network.
Broadcast SSID Method of broadcasting the unique identifier of SSID network in bea-
con frame and type of response to a request for sending the beacon
frame.
•
Enabled
– SSID is broadcasted in beacon frame
• Zero length – Beacon frame does not include SSID. Requests
for sending beacon frame are ignored.
• Clear – All SSID characters in beacon frames are replaced by
0. Original length is kept. Requests for sending beacon frames
are ignored.
Probe Hidden
SSID Probes hidden SSID (only for station (STA) mode)
Client Isolation In access point (AP) mode only. If checked, the access point will
isolate every connected client so they do not see each other (they
are in different networks, they cannot PING between each other). If
unchecked, the access point behavior is like a switch, but wireless –
the clients are in the same LAN and can see each other.
Continued on next page
48