OPERATION MANUAL
Technical changes reserved
0141 0315-20 02.12.2015
Infrared thermometer
Flashbeam 8869
Description
Description
Product description
The infrared thermometer FlashBeam 8869 is a handy and precise de-
vice for contactless temperature measurements. It‘s features are:
• Laser sight
• Switchable between °C / °F
• Automatic Hold function
• Automatic switch-off
• Illuminated display
• Fixed emissivity
• Battery change indicator
Safety
• Use extreme caution when the laser beam is turned on.
• Do not let the beam enter your eye, another person’s eye or the eye
of an animal.
• Be careful not to let the beam on a reflective surface strike your eye.
• Do not allow the laser light beam impinge on any gas which can
explode.
Operating elements
Operation
Operating element Description
Power ON/OFF
The meter automatically powers when the
ON/HOLD key is pressed. Press the MEASU
-
RE key to take a reading. Read the measured
temperature on the LCD. The meter powers
OFF automatically approximately 5 seconds
after the ON/HOLD key is released.
Selecting
Temperature units
(°C/°F)
Select temperature units (degrees C or F)
by first pressing the ON/HOLD key and then
pressing the °C/°F key. The units will blink
on the LCD. Press the °C/°F key until the
desired units are shown on the LCD.
Data Hold
This meter automatically holds the last tem-
perature reading on the LCD for five seconds
after the ON/HOLD key is released. No extra
key presses are necessary to freeze the
displayed reading.
Backlite LCD
Select backlite by first pressing the ON/HOLD
key and then pressing the BACKLITE key.
Repeat the procedure to turn the backlight
OFF.
Laser Pointer
To turn the laser pointer ON, press the
LASER key while pressing the ON/HOLD key.
Repeat the procedure to turn the laser OFF.
B+B Thermo-Technik GmbH | Heinrich-Hertz-Straße 4 | D-78166 Donaueschingen
Fon +49 771 83160 | Fax +49 771 8316-50 | [email protected] | bb-sensors.com
1 / 2
