AZZA U694 Series, Руководство пользователя

Страница: 43 / 49

The
AZZA
U694 MAINBOARD SERIES
Page 42
Auto Detect DIMM/PCI Clk
When “Enabled” is selected, the mainboard will detect the presence of devices on DIMM
and PCI slots. When there is no device present on some of the PCI or DIMM connectors,
the clock on the related DIMM and PCI slot will be disabled to reduce the Electro-Magnetic
Interference (EMI).
Spread Spectrum
When Spread Spectrum is enabled, the EMI radiation on this mainboard will be reduced.
CPU Host / PCI Clock
According to different CPU installed on this mainboard, you will see different clock fre-
quency available for your choice in this field. This field allows to select the CPU FSB and
PCI clock speed.
CPU Vcore Select
(optional for U694BC)
If you want to over-clock your CPU you need to adjust the core voltage. When you press
enter a menu with a range of voltage selections will appear. Before you change the volt-
age please refer to the previous menu PC Health Status (section 3.9) to check what the
Vcore Voltage is for your CPU. If this field is made too high or too low it will cause dam-
age to your CPU. If you have set this voltage too low you may not be able to start your
PC. To overcome this problem use the Ins key.
3.11. Load Optimized Defaults
Managing The PC BIOS
CMOS Setup Utility – Copyright ( C ) 1984 - 2001 Award Software
! ! ! !
Advanced BIOS Features
! ! ! !
Frequency/Voltage Control
! ! ! !
Advanced BIOS Features
! ! ! !
Advanced Chipset Features Set Supervisor Password
!
! !
! Integrated Peripherals Set User Password
!
! !
! Power Management Setup Save & Exit Setup
!
! !
! PNP/PCI Configuration Exit Without Saving
!
! !
! Health Status
ESC : Quit
← ← ← ← ↑↑↑↑ ↓↓↓↓ → → → →
: Select Item
F10 : Save & Exit Setup
Load Optimized Defaults
Load Optimized Values