MVP3 ATX
SYSTEM BOARD
AWARD BIOS SETUP
3-11
4. SL: Sleep LED Connector
This LED will be lightened when the AC power is connected and the
system is power off, darkened when the AC power is disconnected or the
system is powered on.
Pin #
Signal name
1
Signal Pin
2
Ground
5. PW: Power On/Off and External Suspend Switch Connector
According to the setup in CMOS, the PW connector has two functions. It
can be the Power Switch or Suspend Switch of your PC system.
(please refer to Section- 4-7 “Soft-Off by PWRBTN”)
(1) The setup in CMOS is “Instant-off”:
A.
When system power is off :
Click on this switch, the system will be powered on immediately.
B
. When system power is on :
Click on this switch, the system will be powered off instantly
(2)
If the setup in CMOS is “Delay 4 Sec.”, the switch function will be
:
A. When system is power off :
Press this switch, the system will power on immediately.
B. When system power is on :
a. The system is in Full-ON mode :
a-1. Click on this switch ( less than 4 seconds ), the system will be
turned into Suspend mode. (get into a GREEN mode)
a-2. Press and hold this switch for more than 4 seconds, the system
will be powered off.
b. When the system is in Suspend mode :
b-1. Click on this switch ( less than 4 seconds ), the system will
return to Full-ON mode.
b-2. Press and hold this switch more than 4 seconds, the system will
be powered off.
