AZZA P4X2-AV, Руководство пользователя

Страница: 48 / 49

The AZZA P4X MAINBOARD SERIES
Page 47
The User Password can be used to check the user's authority. However, this
password entry is different from the "SUPERVISOR PASSWORD". The User Pass-
word has a different function to the "Supervisor Password" and the "Security Op-
tion" setup in Section 3.5. (Click here):
A. When there is the password stored in the "SUPERVISOR PASSWORD"
1. When "Setup" is selected in the Security Option:
When you use the "User Password" to log into the BIOS setup program, you can
only view the BIOS settings, but you cannot change any settings. The only set-
ting you can change is the "User Password" and you can also select "SAVE &
EXIT SETUP" and "EXIT WITHOUT SAVING" from the main menu. (If you use the
Supervisor Password to log into the PC system, you will have the complete rights
to all the BIOS settings.
2. When "System" is selected in Security Option:
When you turn on the PC system, it will request that you enter the Password.
Without the correct password, the PC system will stop and the operating system
won't be loaded.
B. When there is no password stored in the "SUPERVISOR PASSWORD"
1. When "Setup" is selected in Security Option:
Users can use the "User Password" to log into the BIOS setup program, and they
can change any of the BIOS settings.
2. When "System" is selected in Security Option:
When you turn on your PC, you will be requested to enter the Password. Without
the correct password, the PC system will stop and the operation system will not
be loaded.
3.15. Save & Exit Setup / Exit Without Saving
CMOS Setup Utility – Copyright ( C ) 1984 - 2001 Award Software
! ! ! !
Standard CMOS Features
! ! ! !
Frequency/Voltage Control
!
! !
!
Advanced BIOS Features Load Fail-Safe Defaults
! ! ! !
Advanced Chipset Features
Load Optimized Defaults
! ! ! !
Integrated Peripherals Set Supervisor Password
!
! !
! Power Management Setup Set User Password
! ! ! !
PNP/PCI Configuration
Esc : Quit F9 : Menu in BIOS
← ← ← ← ↑↑↑↑ ↓↓↓↓ → → → →
: Select Item
F10 : Save and Exit Setup
Time, Date, Hard Disk Type ...
! ! ! !
PC Health Status
Save & Exit Setup
Exit Without Saving
Managing The PC BIOS