The
AZZA
P4X MAINBOARD SERIES
Page 28
CPU L1 & L2 Cache
This BIOS setting can be used to enable or disable the CPU's L1 (primary) and L2
(secondary) cache.
CPU L2 Cache ECC Checking
When you select Enabled, the ECC checking will ensure that the data stored on
the L2 cache is accurate.
Monitors
EGA/VGA
Enhanced Graphics Adapter/Video Graphics Array. For EGA, VGA , SEGA,
SVGA or PGA monitor adapters
CGA 40
Color Graphics Adapter power up in 40 column mode
CGA 80
Color Graphics Adapter power up in 80 column mode
MONO
Monochrome adapter includes high resolution monochrome adapters
Halt On
This field allows you to decide which errors, detected during the Power On Self
Test (POST), will halt the system.
Base Memory / Extended Memory / Total Memory
This field displays the amount of memory detected by the system during boot
up. This is a display only field. You cannot make any changes to this field.
Base Memory: Indicates the memory installed below the conventional
1MB space.
Extended Memory: Indicates the memory installed above the 1MB space.
Total Memory: Indicates the total memory installed in the PC system.
Virus Warning
When you enable the virus warning you will receive a warning message
whenever a program (specifically, a virus) attempts to write to the boot sector or
the partition table of the hard disk drive. If you receive such a message you
should immediately run an anti-virus program. Keep in mind that this feature
only protects the boot sector and not the entire hard drive.
NOTE! Many disk diagnostic programs that access the boot sector table can trig-
ger the virus-warning message. If you plan to run such a program, we recom-
mend that you first disable the virus warning.
Managing The PC BIOS
