The
AZZA
P4M Mainboard Series
Page 47
2.5.5. WOL Connector
Connector: CN 16 (WOL)
Type: 3 pin
The Wake-On-LAN (WOL) connector
must be connected to a LAN card that
has Wake-On-LAN output. This con-
nector powers up the system when a
wakeup packet or signal is received
through the LAN card. In order to use
the WOL LAN card or the modem to
trigger the power on the PC system,
the switching power supply must have
the ability to provide a driving current
of at least 720 mA and be connected
to a “5V standby” voltage.
WOL Connector
1 5V_SB
2 Ground
3 WOL
A.1 Standard Infrared Connector
Connector: CN 12
Type: 5 pin
The SIR connector supports an optional wireless transmitting and receiving
module. You must configure UART 2 to select whether UART 2 is directed for
use with COM 2 or IrDA.
Appendix A: Optional Items
Appendix A: Optional Items
Appendix A: Optional Items
The two connectors listed in the appendix are Manufacture Options i.e.
boards that come with these connectors are Made-To-Order. An end user
cannot add them on at a later date. If you are a reseller or a system inte-
grator you must pre-order these items with the manufacturer. If you are an
end user and you would like to have these functions on the board please
speak to your retailer.
Infrared Connector
1 5V DC
2 No Connection
3 IR Reciever
4 Ground
5 IR Transmitter
Appendix A
