17
Hardware Installation
Hardware Installation
Hardware
Inst
allat
ion
PW: Power On / Off and External Suspend Switch Connector
The Power On/Off connector has two functions. It can be the Power Switch or
Suspend Switch of your PC system. You can either chose “Delay 4 Sec or Instant
OFF” (Please refer to the Aware BIOS setup in Chapter 3)
Option 1: If you chose “Delay 4 Sec.” In the BIOS CMOS Setup, the function of
“PW” will be:
A. When system power is "OFF", press this switch, the system will power on.
B. When system power is "ON”, you can select two different mode:
Mode 1: Press the Power ON button and release (less than 4 seconds); the system
will be turned into Suspend mode (turn into the GREEN mode) When the system is in
Suspend mode:
!
Press the Power on button (less than 4 seconds), the system will return to Full-
ON mode.
!
Press and hold the Power On Button for more than 4 seconds, the system will
be powered off.
Mode 2: Press and hold the Power ON button for more than 4 seconds, the system
will be completely powered off.
Option 2: If you chose “Instant OFF.” In the BIOS CMOS Setup, it will operate like
normal ON / OFF Power button.
2.4.12 Speaker and Power LED Connector
Speaker Connector
Connect your chassis speaker to this four pins connector. It allows you to hear
systems beeps and warnings sound.
Front Panel Power LED Connector
Connect your chassis Power LED connector to this four pins connector.