Easy Start Guide
HL117EW | HomePlug AV 500 Mbps
Dual Band (2.4Ghz/5Ghz) Wireless N Extender
C
Setup for New Network Connection
- HL117EW
- Easy Start Guide
- Ethernet Cable
- Warranty Card
- Resource CD
Simple Connect Button
B
Device Overview
A
Package Contents
In Room A, plug in your HomePlug AV device into
the power outlet and connect it to your router’s
ethernet port using an ethernet cable.
Make sure that your router’s internet connection is
up to allow you to access the internet.
1.
WPS Button /
Wireless LED
Power LED
Power Line Activity
LED
Ethernet LED
Ethernet Ports
D
Configuring Wireless Settings (Optional)
On your computer, turn off ‘Wireless Adapter’ (if
applicable).
Open and Launch a web browser. Type in 10.0.10.254
on the web browser’s url link then hit enter key.
Ensure to follow the connection set up below.
Connect an ethernet cable from the PC to any of the
Ethernet Ports of the HL117EW.
1.
2.
3.
Confirm that the connection was established
on both Home Plug AVs. Successful connection
is indicated by Green light on both Power and
Power Line Activity LEDs. Your HomePlug AV
is now ready to use and may now access the
internet.
In Room B, plug in your HL117EW device into the
power outlet. You may connect any device (e.g.
computer / notebook) to its ethernet port; you
may also connect any of your wireless devices
via WiFi (SSID and Password is printed at the
label sticker located at the top surface of your
HL117EW device)
2.
3.
Enter ‘admin’ for Username and ‘admin’ for
Password.
Click the Network tab and select WLAN SETTINGS
from the submenu to modify the wireless settings.
After changing the preferred settings, click the
‘Save’ button to apply changes.
4.
5.
6.
Dual Band Switch
(2.4 Ghz/5hz)
