75
GE1/0/3 (S)
IP group(s):the following ip group(s) match to one mac group.
IP group address:FF1E::101
(::, FF1E::101):
Attribute: Host Port
Host port(s):total 1 port(s).
GE1/0/2 (D) ( 00:03:23 )
MAC group(s):
MAC group address:3333-0000-0101
Host port(s):total 1 port(s).
GE1/0/2
The output shows that GigabitEthernet 1/0/3 of Switch A has become a static router port.
# Display the detailed MLD snooping group information in VLAN 100 on Switch C.
[SwitchC] display mld-snooping group vlan 100 verbose
Total 1 IP Group(s).
Total 1 IP Source(s).
Total 1 MAC Group(s).
Port flags: D-Dynamic port, S-Static port, C-Copy port
Subvlan flags: R-Real VLAN, C-Copy VLAN
Vlan(id):100.
Total 1 IP Group(s).
Total 1 IP Source(s).
Total 1 MAC Group(s).
Router port(s):total 1 port(s).
GE1/0/2 (D) ( 00:01:23 )
IP group(s):the following ip group(s) match to one mac group.
IP group address:FF1E::101
(::, FF1E::101):
Attribute: Host Port
Host port(s):total 2 port(s).
GE1/0/3 (S)
GE1/0/5 (S)
MAC group(s):
MAC group address:3333-0000-0101
Host port(s):total 2 port(s).
GE1/0/3
GE1/0/5
The output shows that GigabitEthernet 1/0/3 and GigabitEthernet 1/0/5 on Switch C have become
static member ports for IPv6 multicast group FF1E::101.
MLD snooping querier configuration example
Network requirements
•
As shown in
, in a Layer-2-only network environment, two multicast sources Source 1
and Source 2 send IPv6 multicast data to multicast groups FF1E::101 and FF1E::102
respectively, Host A and Host C are receivers of multicast group FF1E::101, and Host B and
Host D are receivers of multicast group FF1E::102.