EDGEWINDER PG. 7
OPERATION
1. Always check oil before attempting to start
engine.
2. Never change or alter the propane control
equipment.
3. Never let an untrained or irresponsible
person operate or perform repairs on the
machine. They may hurt themselves and/or
damage the floor or other property.
4. Never complete the connection of the tank
to the machine by using pliers; always do it
by hand. Listen for the rush of fuel to the
lock-out device when you open the tank
valve. If you hear this, it will indicate that a
good connection has been made at the tank.
STORAGE AND HANDLING
1. Always store equipment away from heater
rooms, boilers, gas-fired water heaters or
any other source of open flame.
2. Always store equipment away from possible
damage by falling objects in warehouse-type
areas.
3. Always vent an over-full bottle out of doors
away from all closed places and away from
any fire or flame-producing device. Use a
screwdriver to vent excess propane which
escapes as a white mist until at proper level
in tank.
4. Always store LPG tanks outside. Remove all
tanks from inside building except during
equipment use. Store them in a secure, well
ventilated area.
PG. 2 EDGEWINDER
CAUTION
!
CAUTION
!
READ and UNDERSTAND this material before operating or servicing
this equipment. Failure to understand how to safely operate this tool
could result in an accident causing injury or death.
!
Edgewinder WARRANTY
This warranty is limited as follows:
Component
Term of Warranty
Engine
2 yrs from engine manufacturer
Fuel System
1 yr
LPG Tank
1 yr on valve, 3 yrs on cylinder from date of mfgr.
Body Parts
1 yr
Battery
1 yr from battery mfgr.
Centrifugal Clutch
1 yr
The warranty does not apply to certain consumable or wear parts such as:
Brushes
Belts
Engine tune up parts
Aztec Products, Inc. warrants its products to be free from defects in material and workmanship for a
period of one year from the date of sale. All engines are warranted by the manufacturers (Honda or
Kawasaki) for a period of two years when engine maintenance schedules are followed.
The warranty does not apply to damage or failure caused by abuse, misuse, neglect, disassembly,
alteration, unauthorized modification or repair, lack of proper maintenance, theft or damage by freight
carriers. The warranty applies to parts, labor, and ground freight only. Aztec is not liable for
transportation to or from repair centers or travel for on-site repairs. Aztec Products, Inc. will not be
liable for incidental or consequential damages arising from the use of any of its products, whether
defective or not.
Aztec Products, Inc. agrees, at its discretion, to repair or replace at its own expense any product or
part(s) which examination proves to be defective in workmanship or materials provided that the
purchaser notifies Aztec Products, Inc. directly within the warranty period and follows the Return
Goods Policy. Engine repairs may be performed at engine manufacturer’s service centers. For your
closest center you may call the following numbers:
Kawasaki
616-949-6500
Honda
800-426-7701
In order to obtain parts warranty, the following procedures must be followed:
1. Customer must call Aztec Products, Inc. for an RGA (Return Goods Authorization) Number.
2. We maintain the serial number, date of shipment or sale, and customer name on each piece of
equipment sold. If you were the purchaser, please reference that information on your request for
replacement or repair. If you purchased the equipment through a distributor, please contact them first.
If you are not satisfied, contact Aztec and give us the distributor name, purchase date, and the serial
number of the product.
3. The defective part must be returned via ground freight prepaid to Aztec Products, Inc. with an RGA
number accompanied by a copy to the original purchase invoice. Aztec is not responsible for the cost of
packaging inbound freight, nor inbound freight damage. Pack machine carefully.
4. Only Aztec Products, Inc. or its authorized dealers may make warranty repairs on Aztec Products, Inc.
products. Others do so at their own risk and expense.
5. We also offer to do warranty related repairs free of charge at our facility. Arrangements must be made
in advance as outlined above. We will not accept freight collect returns or returns that do not indicate the
RGA number on the packing list.
The need for proper maintenance and care for this product cannot be overstated. Poor maintenance,
neglect or abuse can prove to be very expensive.
You have purchased a quality product. Each of its components has been tested and approved for use by Aztec
Products, Inc. It is unlikely that you will ever have a warranty claim if you properly maintain our machine.
This warranty is non-transferable.
AZTEC PRODUCTS, INC.
201 Commerce Drive • Montgomeryville, PA 18936 • 800-331-1423 • Fax 215-393-4800
GENERAL INFORMATION
Liquefied petroleum gas (propane) is stored under pressure and must be handled in the proper manner
to be safe. We use only U.L. listed devices to control the release of gas to the engine and we arrange
their respective parts in compliance with Underwriters Laboratories (U.L.) and the National Fire and
Safety Act Pamphlet #58. Observe the following cautions to get the best performance, lowest emissions
and longest life out of your equipment.
PROTECT YOUR
WARRANTY!
Read carefully, any questions regarding the
care and safety of this unit, please
CALL (800) 331-1423
