Azbil Micro Flow MQV0005, Руководство пользователя

Страница: 78 / 90

7-8
Chapter 7. SPECIFICATIONS
*1. The notations L/min (standard) refer to volumetric flow rate per minute after conversion to 20°C,
1 atmosphere. The reference temperature can also be changed to 0°C, 25°C or 35°C in the
C- 1 9
flow rate display unit selection. For details about the controllable range for each gas type, see
the section on Gas type and control range (P. 7-9)
*2. Minimum requisite differential pressure for control of full scale flow rate (condition: outlet pres-
sure = 0 kPa [gauge]).
*3. Operation is possible even below the required differential pressure, but the controllable flow
rate range becomes narrower. Relationship between differential pressure and flow rate (For
Hydrogen) (P. 7-10)
*4. For the advisability of using an inlet pressure greater than 0.5 MPa (gauge), contact the azbil
Group.
*5. The MLP100A100 loader package (sold separately) is needed.
*6. Only models with RS-485 communications option.
„
Korea Certification Mark