Azbil Micro Flow MQV0005, Руководство пользователя

Страница: 47 / 90

5-1
Chapter 5. ADVANCED OPERATION
The advanced operation provides three kinds of modes, "Function setup mode," "Parameter
setup mode," and "Controller information display mode."
„
Setup mode transition operation
Normally, when the power is turned ON, the instantaneous flow rate
is displayed in the basic operation mode.
When keys are operated as described in the diagram below during
instantaneous flow rate display, the operation changes to the specified
mode.
When the operating mode changes to "Function setup mode" or
"Parameter setup mode," the specified setup can be changed.
In the "Device information display mode," you can check the statuses
of major setup items (gas type, full scale flow rate, reference tempera-
ture, and communications address).
Instantaneous flow rate display
[DISP] key
Flow set value display
[DISP] key
Totalized flow display
[DISP] key
Valve amperage display
Function setup mode
Parameter setup mode
Device information display mode
key + [ENT] key
(3 s or more)
[DISP] key
key (3 s or more)
key (3 s or more)
Basic operation Advanced operation
[DISP] key
Power ON
[ ]
[ ]
[ ]
page 5-2
page 5-12
page 5-16